Aeronautical Engineering & Flight Training Labs
Interactive aeronautical laboratory modules, structured ground-school problem sets, and printable worksheets for flight students, instructors, and aerospace learners.
Educational Architecture & Methodology
Interactive calculation sandboxes and tiered problem sets structured to bridge theoretical aerodynamic physics with practical flight planning calculations.
Primary and advanced flight students, Certified Flight Instructors (CFIs), ground school educators, and undergraduate aeronautical engineering students.
Models are documented with applicable technical references, assumptions, and stated bounds across source-specific, regulatory, manufacturer, and educational scenarios.
Interactive visualizers, worked multi-step solutions, oral exam checkride review questions, and printable scenario worksheets with browser-based interactive calculation tools.
🚀 Active Published Laboratory Modules
6 Active ModulesDensity Altitude & High-Hot-Heavy Performance →
Derive thermodynamic air density, pressure altitude, and ISA temperature lapses from real-world METARs. Compare empirical 120-ft rules of thumb against calculations based on the ICAO Standard Atmosphere, with interactive air column visualizers and printable student worksheets.
Wind Triangle Trigonometry, Crosswinds & E6B Navigation →
Vector decomposition, Law of Sines wind correction angle (WCA), groundspeed derivations, and multi-leg cross-country dead reckoning with interactive 360° vector roses and printable student worksheets.
Weight & Balance Statics, CG Shifts & Stability →
Rigid-body moment equilibrium, mass-conserving weight relocation, ballast adjustment kinematics, swept-wing %MAC conversions, and discrete fuel-burn trajectories with interactive balance-beam visualizers and printable worksheets.
Climb Gradients, Obstacle Clearance & Descent Profiles →
Gradient-to-vertical-speed conversions, groundspeed coupling in departure climbs, TERPS-referenced 40:1 departure surface calculations, and Top-of-Descent (TOD) 3:1 vs 3.0° profile modeling with interactive departure slope visualizers and printable worksheets.
Maneuvering Speed, Dynamic Load Factors & Accelerated Stalls →
Weight-scaled VA modeling, dynamic load factor mechanics (n = sec θ in steady coordinated turns), accelerated stall speed elevation (VS,n = VS1 × √n), kinematic turn rate/radius in TAS, and legacy Part 23-referenced V-n envelope modeling with interactive visualizers.
Performance Factoring, Runway Margins & Operating Limitations →
POH baseline lookups, C172S Note 3 wind adjustments (-10% per 9 kt HW), UK CAA SSL 09 multiplicative grass and slope factoring, ICAO declared distances (TORA, TODA, ASDA, LDA), and 14 CFR § 121.195 landing limitations with interactive runway profile visualizer.
📅 Laboratory Curriculum Roadmap
1 Scheduled ModuleSingle-Engine Inoperative (OEI) & Drift-Down Envelopes
Multi-engine asymmetric thrust, critical engine aerodynamics, Vmc certification envelopes, and en-route terrain clearance drift-down trajectories.
Independence & Authority Disclosure: Aeroway is an independent educational reference and engineering modeling suite. Aeroway is not affiliated with, approved by, certified by, or endorsed by the Federal Aviation Administration (FAA), European Union Aviation Safety Agency (EASA), or International Civil Aviation Organization (ICAO).